Options for High Current Products: HOMA High Current Options
Homa High current

HOMA Options for bar mounted contactors

Due to many years of experience in the field of bar contactors and switching devices, HOMA High Current Technology offers various options for powerful bar contactors and switching devices. HOMA offers the ideal product for railway technology, foundries and steel works, solar and wind turbines, starters, battery test equipment, ripple control systems, rolling and crane systems.

As a result, HOMA has established itself as a system supplier to well-known manufacturers and is able to implement individual requirements. In addition to the production of switching devices as components, HOMA can solve complex tasks for customers and develop, manufacture and install complete control cabinets including power electronics.

The multitude of options offers the right solution for every challenge. Also in the range: Special accessories to expand the function of large contactors in the context of overcurrent shutdown.

HOMA AC/DC Bar mounted Contactors

Bar mounted contactors by HOMA: DC Switches

DC Switches

HOMA manufactures DC switches for a variety of DC applications. These can operate under voltages of up to 3.000V DC. The HOMA product range includes switches and switching combinations with positive and negative contacts. HOMA switches are being used for many years in applications that have to operate under high temperatures and continue to conduct and switch high voltages. By using silver contacts and therefore having low ohmic losses, HOMA switches improve the energy balance and reduce energy losses. DC switches can reach switching periods of under 16 milliseconds.

Bar mounted contactors by HOMA: AC Switches

AC Switches

HOMA AC switches are often used in applications where high currents under difficult switching circumstances have to be switched. Difficult circumstances are given i.e. in cases of low pure cosinus phi. These applications can be found in motors, inductive loads and capacitive loads. HOMA switches are worldwide known for switching of high currents.

HOMA switches can switch currents of up to 50.000A.

HOMA DC-/AC Switches: Product Range

Power contactors (on Load)

  • DC-contactors up to a maximum of 12.000A / 3.000V
  • Medium-frequency contactors up to a maximum of 12000A / 3.000V < 10 kHz
  • Medium-frequency contactors up to a maximum of 24000A / 3.000V
  • Capacitor contactors up to a maximum of 1.000A / 3.000V < 10kHz

High current switches (off Load)

  • Cut-off and changeover switches up to a maximum of 50.000A / 3.000V / 0-150kHz
  • Air- and water-cooled commutators and pole-reversal contactor up to a maximum of 25.000A
  • Command units to control recurring switching operations
  • Contact installations for galvanic-technology in the form of air- and water-cooled prism or sliding contacts up to a maximum of 20.000A

HOMA Bar mounted Contactors

In HOMA Bar mounted Contactors current-carrying components are organized on the basis of a main frame construction. All required modules are arranged on top of a single frame (bar), for example: Magnet system, Terminal plate for power circuit, Switch locking system and Movable contacts. The two examples below (G500 / HAT-2W) illustrate the construction.

TYP G500

1
magnet system
2
coil
3
AUXILIARY CONTACTS
4
U-profile
5
control unit
6
terminal plate
7
grounding
8
main frame
9
nc-current pole
10
no main poles
Bar mounted contactors by HOMA - TYP G500

TYP HAT-2W

1
SWITCH LOCK. SYSTEM
2
magnet system
3
coil
4
AUXILIARY CONTACTS
5
U-PROFILe
6
stationary contact
7
connection
8
main frame
9
movable contacts
10
inter locking device
Bar mounted contactors by HOMA - Typ HAT-2W

HOMA Switchgear

For over 60 years

HOMA switches are being built into different applications for more than 60 years and have been supplied to more than 100 countries. Due to the worldwide experience of HOMA, many national and international norms can be fullfield and have conducted a vast number of type tests for our products. We equip our switches with coils that can be operated worldwide with 60V to 480V AC/DC. The worldwide distribution network ensures minimal downtimes in case of a break down. HOMA is known for short delivery times and due to its modular design, switches can be assembled and delivered within 24 hours.

HOMA Switchgear - switching

Switching

Air-break contactors and combinations of switches to deal with normal to complicated switching activities for all types of electrical loads.

HOMA Switchgear - isolation

Isolation

Sliding contacts, air-break contactors and air- or water-cooled high current switches for galvanic interruption of circuits without a control current for technical or safety reasons.

HOMA Switchgear - distributing

Distributing

Different types of commutators to select different sources or for an alternative supply of the electrical load circuit.

HOMA Switchgear - controlling

Controlling

Commutators and pole-reversal contactor including associated control systems, reversing contactors etc. for process-related reversion of the electrical current or rotational direction; braking contactors for switchoff for drives that simultaneously trigger dynamic braking systems.

HOMA switchgears - regulating

Regulating

Starting contactor / rotor-short circuit contactor, as well as starting coupling contactor / cascade coupling contactor for large machinery in association with subsynchronous static converter systems cascade; capacitor contactors for balancing or compensating inductive electrical loads. Starting, damping and discharge resistors.

Products

HOMA Over-current sensor

HOMA Over-current sensor

For expanding the function of large Contactors for over-current Deactivation

The device enables the monitoring of up to three phase currents. If one of the thresholds set via the jumper is exceeded, the coil current (field current) of the large contactor is interrupted and, thus, deactivated, in the event of over-current. Only one common threshold can be set for the three sensors. Both AC and DC currents can be monitored. In the case of DC currents, the triggering does not depend on the current direction. The system can also be utilised to monitor alternating current systems. The three sensors can then be assigned to each phase.

The sensors themselves must be connected directly to the busbars. They can be connected via screws or cable ties (black). The current measuring functions by measuring the field strength H that surrounds every live conductor. Due to the fact that the field strength depends on the distance of the measuring point from the conductor, the sensors must be installed in accordance with the instructions.

The sensors are delivered with a 1 m long connection cable as standard and connected to the control unit belonging to the system. Neither connection work nor adjustments need to be carried out on the sensors.

Documents to download

|
17 MB
Speichern

HOMA Switches DE / EN

Overview HOMA DC/AC Switches

Save PDF
|

CONTACTORS RAILWAY DE / EN

AC/DC Contactors for railway applications

Save PDF
|

CONTACTOR SPECIFICATION DE / EN

Printed Forms

Save PDF
|

HOMA PRODUCTS & SERVICES DE / EN

General Overview

Save PDF
|

HOMA OVER-CURRENT SENSOR DE / EN

And Analysis Device

Save PDF
Sadik Yalcin
Your specialist for Options Sadik Yalcin Authorized representative divisional manager for contactors
Spricht Deutsch
Türkçe konuşulur
Speaks English

s.yalcin
@homa-ob.de
+49 (0)208 8596 -332
vCard
for your address book

© 2018 HOMA Hochstromtechnik